SEE NEWSONIC PICTURE GALLERY Collection of handmade geometry objects and embodiments used in the Newsonic Experimens by Greydon Moore

PHOTO OF MOBILES DESCRIBED IN 'TOPPLE 1'

Hand made
hexagram shaped paper
mobiles are seen in the upstairs room



Part
of the
'Ferris Wheel'
is against the back wall
at the end of the mahogany strip.
The photo is wobbly (distorted) in 3D but
not in mono, it turns out an effect seen only in
Virtual Stereo, because a simple moulded plastic
lens in a dirt cheap $16.00 Kodak camera is
not purely shaped, its distorting is
not seen normally but in 3D
becomes glaringly
obvious

PHOTOS FOR 'KABOOMB' AND 'PROJECTIONS' DESCRIBED IN 'TOPPLE 2'

Where the faceplate landed
by the foot of the ladder.
I took photos of it.







The
faceplate
started on the table
hanging by a thin wooden garden
stake sticking out of a core for copper wire
the core now on the floor near the table, the garden stake
strewn further along and the faceplate now near the foot of the ladder,
this is how far the appratii sailed through the air when hit with a particularly
gigantic Mighty Powerful KABOOMB which had ganged up into
a power 'pump' in a loud passage of George Gershwin's
'American In Paris'. For the moment of
glimpse before the crash, it was
clear that ALL modern day
stereo sets do not
even BEGIN
approach the
power that
occurrs
in a
symphonic
orchestra when
heard from the point
of the view of the conductor. No
wonder symphony orchestra conductors live so long

NEXT

The
tiny wafer
thin tweeter is
seen sticking from a
on top of the household ladder.
Chance shadow by the camera flash
(cheap small 110 ml camera) resulted
in two wafers seen sticking up, the
left one is real, the right one is
the shadow cast on the wall
under the table



The
business
from the back. The
faceplates are the fronts
of two speaker box shells originally
for the getto blaster you see sitting mid table




How the
faceplates were
mounted on support stands

The
faceplates
were both mounted as
you see here next, the right
hand assembly not seen behind the
getto blaster, the copper spool for
the right assembly was empty, it
is the one you see on the
floor in above pics
beside the
ladder




DONE

Web site/display/designs/image enhancements - Greydon Moore World's largest cosmic teaching site - Ottawa 2001/2004         form   A & O 3 3